Print Friendly, PDF & Email

Hands-on Bluetooth Training Bootcamp, covers both Bluetooth Classic

and Bluetooth LE (BLE)

Hands-on Bluetooth Training Bootcamp is a 3-day practical course on Bluetooth Classic and Bluetooth LE with workshops and exercises, workshops and a practical Classic Bluetooth and BLE Training.

For Detailed Course Agenda, CLICK HERE.

Bluetooth Classic & Bluetooth Low Energy

Bluetooth Classic is designed for continuous two-way data transfer with high Application throughput (up to 2.1 Mbps). Bluetooth Classic highly effective, but only for short distances. So, it’s a perfect solution in the case of streaming audio and video, or mice and other devices that need a continuous, broadband link.

TONEX BLUETOOTH TRAINING

Bluetooth Low Energy – 100x lower power consumption with low duty cycle

Bluetooth Low Energy provides only 0.3 Mbps of Application throughput and the data is sent in small (20 bytes) packages with minimum latency.

The  peak current of BLE (up to 15 mA) is half of the BT Classic current (up to 30 mA).

 

StandardClassic BluetoothBLE(Bluetooth Low Energy)
Network and TopologyScatternetStar Bus
Power consumptionLow (less than 30 mA)Very Low (less than 15 mA)
Speed700 Kbps1 Mbps
Range<30 m50 meters( 200 meters or higher in open field)
RF Frequency band2400 MHz (ISM)2400 MHz (ISM)
Frequency Channels79 channels from 2.400 GHz to 2.4835 GHz with 1 MHz spacing40 channels from 2402 MHz to 2480 MHz (includes 3 advertising and 37 data channels)
ModulationGFSK (modulation index 0.35) , π/4 DQPSK, 8DPSKGFSK (modulation index 0.5); Lower power consumption
Latency in data transfer between two devicesApprox. 100 msApprox. 3 ms
SpreadingFHSS (1MHz channel)FHSS (2MHz channel)
Link layerTDMATDMA
message size(bytes)358 (Max)8 to 47
Error detection/correction8 bit CRC(header), 16 bit CRC, 2/3 FEC(payload), ACKs24 bit CRC, ACKs
Security64b/128b, user defined application layer128 bits AES, user defined application layer; Enhanced models by NIST/NSA
Application throughput0.7 to 2.1 Mbpsless than 0.3 Mbps
Nodes/Active Slaves7 (Piconet)Unlimited (using Slave/Master topology)

Request More Information

  • Please complete the following form and a Tonex Training Specialist will contact you as soon as is possible.

    * Indicates required fields

  • This field is for validation purposes and should be left unchanged.